When connecting an HP Secure Web Console, HP Product J3591A, to an HP9000
L-class server, make sure the VT100 terminal emulation mode is selected.
Also check the terminal emulation mode of the serial port on the L-class
Guardian Service Processor (GSP).
To access the GSP from the system console, type CNTL-B
After logging in at the GSP prompt (press ENTER at the login and password
prompts if no password has been set) type the CA command at the prompt:
GSP> CA
Make sure the following settings are selected:
Serial Port baud rate: 9600
Flow Control: Software
Terminal type: VT100
Changing the terminal type from HPTERM to VT100 fixes the above problem.
To return to the hp-ux system prompt, Enter CO at the GSP> prompt:
GSP> CO